What Size Plant Trailer Do I Need for My Mini Excavator?

Buying a plant trailer almost always starts with the machine you need to move. Pick a trailer that is too small and you’re either overloaded or making two trips; pick one that is too big and you’re towing extra weight and length you don’t need. This guide walks through the three checks that decide the right size: how much your machine really weighs, how much the trailer can legally carry, and how much deck length you need.

Step 1: Work out what your machine really weighs

Mini excavators are sold by weight class – “1.7 tonne”, “2.5 tonne” and so on – but the badge is only a starting point. Look for the operating weight in the manufacturer’s spec sheet or on the machine’s plate. Operating weight normally includes a standard bucket and full fluids, but it does not include everything you’ll actually put on the trailer.

Add on:

  • Extra buckets (trench, mud, rock or batter buckets)
  • A tilt hitch or quick hitch if it isn’t already counted
  • Attachments such as an auger, ripper or rock breaker
  • Chains, binders and anything else that rides on the deck

A 1.7 t excavator with a tilt hitch and two extra buckets can easily come to 1.9–2.0 t on the trailer. If you’re unsure, a trip over a public weighbridge with the machine and its gear loaded gives you a real number.

Step 2: Check the trailer’s payload, not just its ATM

A trailer’s ATM (Aggregate Trailer Mass) is the maximum the trailer and everything on it may weigh. What you can actually carry is the payload: ATM minus the trailer’s own empty weight (tare). That’s why a light trailer matters – every kilo saved on the chassis is a kilo more you can carry. (We explain all the terms in ATM, GTM, Tare and Payload Explained.)

Here’s how our three Vlemmix 3500 kg plant trailers compare:

TrailerInternal deckAxlesTarePayload
3m Trailer300 x 150 cm2700 kg2800 kg
4m Trailer400 x 150 cm2770 kg2730 kg
4m 3-Axle Trailer400 x 150 cm3900 kg2600 kg

Leave yourself some margin. Running permanently at the payload limit is legal, but it leaves no room for the extra bucket you’ll inevitably throw on.

Step 3: Make sure it fits on the deck

Weight is only half the question. Measure your machine’s transport length – tracks plus the boom folded in its travel position – and check it sits comfortably on the deck with room for the tie-downs. You also need to be able to position the machine so that its weight sits slightly ahead of the axles; that gives the trailer the right amount of weight on the tow ball and makes it tow straight. A deck that is only just long enough often forces the machine too far forward or back.

Which Vlemmix plant trailer suits which machine?

As a general guide, using total loaded weight (machine plus everything on the deck):

  • Micro excavators and machines under about 1.5 t: the 3m Trailer. Compact and easy to manoeuvre, with plenty of spare payload for attachments.
  • 1.5–1.8 t excavators (the most common size): the 3m Trailer for a single machine, ideal for tight-access jobs. Choose the 4m Trailer if you also carry a full set of buckets, a second small machine or materials.
  • Loads around 2–2.5 t, or longer machines: the 4m Trailer gives you the extra metre of deck with 2730 kg payload.
  • Heavy loads carried often, especially on highways: the 4m 3-Axle Trailer spreads the load over three axles for maximum stability. Keep in mind its payload (2600 kg) is a little lower because the third axle adds weight – see 2-axle vs 3-axle plant trailers.

The same method works for other machines – skid steers, mini loaders, scissor and boom lifts, forklifts and rollers: total loaded weight first, then payload, then deck length.

Don’t forget the tow vehicle

A loaded plant trailer can approach 3.5 tonnes, which is at or near the limit for most utes. Before you buy, check that your vehicle’s towing capacity, maximum tow ball load and gross combination mass all work with the loaded trailer. We cover this in detail in Can My Ute Tow a 3.5 Tonne Plant Trailer?

Still not sure which size?

Tell us the make and model of your machine and what you usually carry, and we’ll recommend the right trailer. All three Vlemmix 3500 kg plant trailers are in stock in Dural, Sydney, and you’re welcome to bring your machine measurements to a viewing (by appointment).

Request a quote or call us on (02) 9119 2914.